Select page
Search
Search

Accessories

Ferrule Secured Thimble with Eye Bolt

How to order:

(additional to the designation of the re-quired rope) f.i.: a 13 mm rope, thimble DIN 6899 (if DIN 3090, please specify) selected eye bolt M 20, 450 mm long and spring:

One rope end with thimble and eye bolt M 20 x 450 D

 

Please note:

The elevator rope constructions shown in this catalogue have very difficult minimum breaking forces. When speci-fying rope terminations and springs or spring buffers, their respective maximum applyable force is to be con-sidered.

Rope terminations are to be secured against rotation.

 

Anti-twist rope sets (4 mm rope with 2 wire rope grips) are available ex stock.

 

On request we supply for this kind of rope suspension a complete accessory (unmounted), comprising.

 

 

 

Swaged Fitting with Thread

This slim construction of rope termination is particularly suitable for modern concepts of machineroomless elevators.

These terminations must be secured against rotation by means of the big securing hole at the upper end of the rod and a small steel wire rope. The small inspection hole in the swaged part of the terminal allows to control the presence of sufficient inserted rope length.

According to EN 81 it is necessary for such a non-standardized termination system, to demonstrate to an authorized body that it is a system of equivalent safety like the usual standardized ones. “TÜV Süddeutschland” have certified, on the basis of researches at the “Institut für Fördertechnik” at the University of Stuttgart, that our system of swaged fittings fulfils the requirements of EN 81-2000 for DRAKO-ropes with fibre cores as well as for DRAKO-ropes with steel core (fullsteel ropes), exception DRAKO 300 TX.

 

Please note:

The elevator rope constructions shown in this catalogue have very difficult minimum breaking forces. When specifying springs or spring buffers, their respective maximum applyable force is to be considered.

 

 

Symmetric Wedge Socket EN 13411-7 (DIN 15315) with Eye Bolt DIN 444

 

Termination acc. EN 13411-7 (DIN 15 315) in combination with our eye bolts fulfil the requirement of EN 81-1, clause 9.2.3, to withstand at least 80% of the minimum breaking force even when used together with the fullsteel ropes DRAKO 250 H and 300 H.

 

Please note:

The elevator rope constructions shown in this catalogue have very different minimum breaking forces. When specifying rope terminations and springs or spring buffers, their respective maximum applyable force is to be considered.

Rope terminations are to be secured against rotation.

 

Asymmetric Wedge Socket DIN 43148 (EN 13411-6) with Eye Bolt Similar to DIN 444

 

Terminations acc. DIN 43 148 only in some combinations of rope constructions, rope diameters and eye bolts are according to the requirement of EN 81-1, clause 9.2.3. (Requirement: withstanding at least 80% of the ropes minimum breaking force). Please contact us in case of any questions.

 

Please note:

The elevator rope constructions shown in this catalogue have very different minimum breaking forces. When specifying rope terminations and springs or spring buffers, their respective maximum applyable force is to be considered.

Rope terminations are to be secured against rotation.

 

 

Eye Bolter

DIN 444

(in combination with symm. wedge sockets DIN 15 315)

Similar DIN 444

(in combination with asymm. wedge sockets DIN 43 148)

 

 

Wire Rope Grips EN 13411-5

to be used with wedge sockets DIN 15315 / EN 13 411-7 and DIN 43 148 / EN 13 411-6

 

Springs for Rope Terminations

 

 

Elastomer Spring Buffers for Rope Terminations

Characteristics

  • grease and oil resistant
  • excellent damping properties
  • material: cellular polyurethane-elastomer